在之前的文章中我们有介绍过Docker的安装,不少朋友在安装后不知要如何使用Docker容器,下面小编就给大家介绍下Linux如何使用Docker容器。
1.启动一个Docker容器
[root@localhost ~]# docker run -i -t Ubuntu /bin/bash
Unable to find image ‘ubuntu’ locally
Pulling repository ubuntu
04c5d3b7b065: Download complete
511136ea3c5a: Download complete
c7b7c6419568: Download complete
70c8faa62a44: Download complete
d735006ad9c1: Download complete
Status: Downloaded newer image for ubuntu:latest
注:
-i:打开容器中的STDIN
-t:为容器分配一个伪tty终端
从上面我们可以看出,首先Docker会检查本地是否存在ubuntu镜像,如果在本地没有找到该镜像的话,那么Docker就会去官方的Docker Hub Registry查看Docker Hub中是否有该镜像。Docker一旦找到该镜像,就会下载该镜像并将其保存到本地的宿主机中。
然后,Docker在文件系统内部用这个镜像创建了一个新的容器。该容器拥有自己的网络、IP地址,以及一个用来可以和宿主机进行通信的桥接网络接口。最后,我们告诉Docker在新容器中要运行什么命令。
当容器创建完毕之后,Docker就会执行容器中的/bin/bash命令。这时间我们就可以看到容器内的shell
root@8c342c0c275c:/#
注:8c342c0c275c代表容器的ID
2.使用容器
查看该容器的主机名
root@8c342c0c275c:/# hostname
8c342c0c275c
可以看到,容器的主机名就是该容器的ID
查看该主机的hosts文件
root@8c342c0c275c:/# cat /etc/hosts
172.17.0.2 8c342c0c275c
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
可以看到Docker为该容器的IP地址添加了一条主机配置项。
查看该容器的IP地址
root@8c342c0c275c:/# ip a
1: lo: 《LOOPBACK,UP,LOWER_UP》 mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
4: eth0: 《BROADCAST,UP,LOWER_UP》 mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 02:42:ac:11:00:02 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.2/16 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::42:acff:fe11:2/64 scope link
valid_lft forever preferred_lft forever
查看容器中运行的进程
root@8c342c0c275c:/# ps -aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.1 18168 1976 ? Ss 09:38 0:00 /bin/bash
root 19 0.0 0.0 15568 1144 ? R+ 09:55 0:00 ps -aux
在容器中安装一个软件包
root@8c342c0c275c:/# apt-get update && apt-get install vim
Ign http://archive.ubuntu.com trusty InRelease
Ign http://archive.ubuntu.com trusty-updates InRelease
Ign http://archive.ubuntu.com trusty-security InRelease
Hit http://archive.ubuntu.com trusty Release.gpg
Get:1 http://archive.ubuntu.com trusty-updates Release.gpg [933 B]
Get:2 http://archive.ubuntu.com trusty-security Release.gpg [933 B]
Hit http://archive.ubuntu.com trusty Release
Get:3 http://archive.ubuntu.com trusty-updates Release [62.0 kB]
Get:4 http://archive.ubuntu.com trusty-security Release [62.0 kB]
Get:5 http://archive.ubuntu.com trusty/main Sources [1335 kB]
Get:6 http://archive.ubuntu.com trusty/restricted Sources [5335 B]
Get:7 http://archive.ubuntu.com trusty/universe Sources [7926 kB]
Get:8 http://archive.ubuntu.com trusty/main amd64 Packages [1743 kB]
Get:9 http://archive.ubuntu.com trusty/restricted amd64 Packages [16.0 kB]
Get:10 http://archive.ubuntu.com trusty/universe amd64 Packages [7589 kB]
Get:11 http://archive.ubuntu.com trusty-updates/main Sources [193 kB]
Get:12 http://archive.ubuntu.com trusty-updates/restricted Sources [1874 B]
Get:13 http://archive.ubuntu.com trusty-updates/universe Sources [119 kB]
Get:14 http://archive.ubuntu.com trusty-updates/main amd64 Packages [493 kB]
Get:15 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [14.8 kB]
Get:16 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [298 kB]
Get:17 http://archive.ubuntu.com trusty-security/main Sources [70.1 kB]
Get:18 http://archive.ubuntu.com trusty-security/restricted Sources [1874 B]
Get:19 http://archive.ubuntu.com trusty-security/universe Sources [19.1 kB]
Get:20 http://archive.ubuntu.com trusty-security/main amd64 Packages [229 kB]
Get:21 http://archive.ubuntu.com trusty-security/restricted amd64 Packages [14.8 kB]
Get:22 http://archive.ubuntu.com trusty-security/universe amd64 Packages [98.1 kB]
Fetched 20.3 MB in 41s (490 kB/s)
Reading package lists.。。 Done
Reading package lists.。。 Done
Building dependency tree
Reading state information.。。 Done
The following extra packages will be installed:
libgpm2 libpython2.7 libpython2.7-minimal libpython2.7-stdlib vim-runtime
Suggested packages:
gpm ctags vim-doc vim-scripts
The following NEW packages will be installed:
libgpm2 libpython2.7 libpython2.7-minimal libpython2.7-stdlib vim
vim-runtime
0 upgraded, 6 newly installed, 0 to remove and 2 not upgraded.
Need to get 9083 kB of archives.
After this operation, 42.9 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.ubuntu.com/ubuntu/ trusty/main libgpm2 amd64 1.20.4-6.1 [16.5 kB]
Get:2 http://archive.ubuntu.com/ubuntu/ trusty/main libpython2.7-minimal amd64 2.7.6-8 [307 kB]
Get:3 http://archive.ubuntu.com/ubuntu/ trusty/main libpython2.7-stdlib amd64 2.7.6-8 [1872 kB]
Get:4 http://archive.ubuntu.com/ubuntu/ trusty/main libpython2.7 amd64 2.7.6-8 [1044 kB]
Get:5 http://archive.ubuntu.com/ubuntu/ trusty/main vim-runtime all 2:7.4.052-1ubuntu3 [4888 kB]
Get:6 http://archive.ubuntu.com/ubuntu/ trusty/main vim amd64 2:7.4.052-1ubuntu3 [956 kB]
Fetched 9083 kB in 51s (175 kB/s)
Selecting previously unselected package libgpm2:amd64.
(Reading database 。。。 11527 files and directories currently installed.)
Preparing to unpack 。。。/libgpm2_1.20.4-6.1_amd64.deb 。。。
Unpacking libgpm2:amd64 (1.20.4-6.1) 。。。
Selecting previously unselected package libpython2.7-minimal:amd64.
Preparing to unpack 。。。/libpython2.7-minimal_2.7.6-8_amd64.deb 。。。
Unpacking libpython2.7-minimal:amd64 (2.7.6-8) 。。。
Selecting previously unselected package libpython2.7-stdlib:amd64.
Preparing to unpack 。。。/libpython2.7-stdlib_2.7.6-8_amd64.deb 。。。
Unpacking libpython2.7-stdlib:amd64 (2.7.6-8) 。。。
Selecting previously unselected package libpython2.7:amd64.
Preparing to unpack 。。。/libpython2.7_2.7.6-8_amd64.deb 。。。
Unpacking libpython2.7:amd64 (2.7.6-8) 。。。
Selecting previously unselected package vim-runtime.
Preparing to unpack 。。。/vim-runtime_2%3a7.4.052-1ubuntu3_all.deb 。。。
Adding ‘diversion of /usr/share/vim/vim74/doc/help.txt to /usr/share/vim/vim74/doc/help.txt.vim-tiny by vim-runtime’
Adding ‘diversion of /usr/share/vim/vim74/doc/tags to /usr/share/vim/vim74/doc/tags.vim-tiny by vim-runtime’
Unpacking vim-runtime (2:7.4.052-1ubuntu3) 。。。
Selecting previously unselected package vim.
Preparing to unpack 。。。/vim_2%3a7.4.052-1ubuntu3_amd64.deb 。。。
Unpacking vim (2:7.4.052-1ubuntu3) 。。。
Setting up libgpm2:amd64 (1.20.4-6.1) 。。。
Setting up libpython2.7-minimal:amd64 (2.7.6-8) 。。。
Setting up libpython2.7-stdlib:amd64 (2.7.6-8) 。。。
Setting up libpython2.7:amd64 (2.7.6-8) 。。。
Setting up vim-runtime (2:7.4.052-1ubuntu3) 。。。
Processing /usr/share/vim/addons/doc
Setting up vim (2:7.4.052-1ubuntu3) 。。。
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vim (vim) in auto mode
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vimdiff (vimdiff) in auto mode
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/rvim (rvim) in auto mode
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/rview (rview) in auto mode
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vi (vi) in auto mode
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/view (view) in auto mode
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/ex (ex) in auto mode
update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/editor (editor) in auto mode
Processing triggers for libc-bin (2.19-0ubuntu6.4) 。。。
退出容器
root@8c342c0c275c:/# exit
exit
当我们输入exit后,容器就停止工作了。只有在指定的/bin/bash命令处于运行状态的时间,容器才会相应地处于运行状态。一旦退出容器,/bin/bash命令也就结束了,这时容器也就停止了。
查看系统中容器的列表
[root@localhost ~]# docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
8c342c0c275c ubuntu:latest “/bin/bash” 26 minutes ago Exited (0) 5 minutes ago sharp_bohr
8c342c0c275c:代表容器的ID,
ubuntu:latest :创建容器的镜像
“/bin/bash” :容器最后执行的命令
26 minutes ago :创建时间
Exited (0) 5 minutes :容器退出的状态
sharp_bohr :容器的名称
Docker中容器的命名
Docker在创建容器时会自动为容器生成一个随机的名称。那么如果我们想在创建一个容器时指定该容器的名称可以使用如下命令:
[root@localhost ~]# docker run --name ovcer_the_container -i -t ubuntu /bin/bash
root@1ce9f640478d:/#
上面的命令将会创建一个名为ovcer_the_container的容器。对于一个合法的容器的名称来说只可以包括以下字符:小写字母a~z、大写字母A-Z、数字0~9、下划线、圆点、横线。
上面就是Linux使用Docker容器的方法介绍了,在使用命令创建Docker容器后,就可以使用命令对Docker容器进行命名了。