复制代码 代码如下:
'作者：刘先勇 (eric liu)
'将以下代码复制并保存为"系统命令.vbs"，并运行安装。
'安装成功后，可通过在程序、文件或文件夹上点右键->发送到->系统命令来设置一个命令，然后在运行中就可以输入该命令打开文件了。
'脚本运行一次后在右键菜单中增加从这里运行cmd的快捷方式，还增加查找目标文件快捷方式
'on error resume next
if (lcase(right(wscript.fullname,11))<>"wscript.exe") then
set objshell=createobject("wscript.shell")
objshell.run("wscript //nologo "&chr(34)&wscript.scriptfullname&chr(34))
wscript.quit
end if
set pcmd=createobject("wscript.shell")
set pfso=createobject("scripting.filesystemobject")
set pshell = createobject("shell.application")
set psysenv = createobject("wscript.shell").environment("system")
strcomputer = "."
set pwmiservice = getobject("winmgmts:\\" & strcomputer & "\root\cimv2")
function lgetpath(pfile)
ilastseppos = instrrev(pfile, "\", -1, 1)
if ilastseppos <= 0 then
lgetpath=""
exit function
else
lgetpath = left(pfile, ilastseppos-1)
end if
end function
function getlnktarget(linkpath)
linkpath=replace(linkpath, "\", "\\")
set pfiles = pwmiservice.execquery("select * from win32_shortcutfile where name = " & "'" & linkpath & "'")
for each pfile in pfiles
getlnktarget=pfile.target
exit for
next
end function
function listsyscmd(pfilename)
syscmdpath=pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd")
set pfolder = pfso.getfolder(syscmdpath)
set pfile = pfso.opentextfile(pfilename, 2, true)
for each file in pfolder.files
linkpath=syscmdpath & "\" & file.name
if ucase(right(file.name, 4))=".lnk" then
set lnkfiles = pwmiservice.execquery("select * from win32_shortcutfile where name = " & "'" & replace(linkpath, "\", "\\") & "'")
for each lnkfile in lnkfiles
pfile.writeline(linkpath & " " & lnkfile.target)
next
else
pfile.writeline linkpath
end if
next
end function
function getconfigpath
set pfolder = pshell.browseforfolder(0, "请选择一个目录:", 0, "::{20d04fe0-3aea-1069-a2d8-08002b30309d}")
if pfolder is nothing then
wscript.quit
end if
set pfolderitem = pfolder.self
getconfigpath = pfolderitem.path
end function
sub setenv(ppath, pvalue)
if pvalue="" then
psysenv.remove(ppath)
else
psysenv(ppath) = pvalue
end if
end sub
function getenv(ppath)
getenv = psysenv(ppath)
end function
'判断一个字符串是否匹配一个正则表达式
' ^\w+[@]\w+[.]\w+$ e-mail地址
' ^[0-9-]+$ 数字
function ismatch(str, patrn)
set r = new regexp
r.pattern = patrn
ismatch = r.test(str)
end function
sub addnewcmd(pshortcutname, ptargetpath, pcmdlocation)
if pshortcutname<>"" then
linkdir = pcmdlocation
set pcmdlink = pcmd.createshortcut(linkdir & "\" & pshortcutname & ".lnk")
pcmdlink.targetpath = ptargetpath
pcmdlink.windowstyle = 1
pcmdlink.hotkey = ""
pcmdlink.iconlocation = "%systemroot%\system32\shell32.dll,146"
pcmdlink.description = "shortcut created at " & date() & " " & time()
pcmdlink.workingdirectory = lgetpath(ptargetpath)
pcmdlink.save
end if
end sub
set pargs=wscript.arguments
if pargs.count = 0 then '无参运行，复制自身到sendto文件夹。
msgbox "注意无参运行即执行安装过程！" & vbcrlf & _
"安装过程包括以下操作：" & vbcrlf & vbcrlf & _
"1、在发送到目录中建立该脚本的快捷方式；" & vbcrlf & _
"2、完成安装后可通过发送到建立快捷方式；" & vbcrlf & _
"3、所有快捷命令可通过运行(win+r)执行。" & vbcrlf
syscmdpath = getconfigpath
if syscmdpath = "" then wscript.quit()
pcmd.regwrite "hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd", syscmdpath, "reg_sz"
'path = pcmd.regread("hkey_local_machine\system\controlset001\control\session manager\environment\path")
path = getenv("path")
if right(syscmdpath, 1)="\" then syscmdpath = left(syscmdpath, len(syscmdpath)-1)
syscmdpathpattern ="(;)?(" & replace(syscmdpath, "\", "\\") & ")(\\)?(;|$)"
if not ismatch(path, syscmdpathpattern) then
path = path & ";" & syscmdpath
setenv "path", path
end if
thisfile = wscript.scriptfullname
if thisfile<>syscmdpath & "\" & wscript.scriptname then
pfso.copyfile thisfile, syscmdpath & "\"
thisfile = syscmdpath & "\" & wscript.scriptname
end if
addnewcmd "n系统命令", thisfile, pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\sendto")
'在右键菜单中增加创建当前文件或文件夹的系统快捷命令的菜单项
pcmd.regwrite "hkey_classes_root\*\shell\g创建系统命令\command\", "wscript.exe " & thisfile & " ""%1""", "reg_sz"
pcmd.regwrite "hkey_classes_root\directory\shell\g创建系统命令\command\", "wscript.exe " & thisfile & " ""%1""", "reg_sz"
'在右键菜单中增加在当前路径打开cmd窗口命令的菜单项
pcmd.regwrite "hkey_classes_root\*\shell\q在此打开cmd\command\", "cmd /k pushd ""%1\\..""", "reg_sz"
pcmd.regwrite "hkey_classes_root\directory\shell\q在此打开cmd\command\", "cmd /k pushd ""%1""", "reg_sz"
'在右键菜单中增加在查找快捷方式位置的菜单项
pcmd.regwrite "hkey_classes_root\*\shell\w查找目标位置\command\", "wscript.exe " & thisfile & " s ""%1""", "reg_sz"
pcmd.regwrite "hkey_classes_root\directory\shell\w查找目标位置\command\", "wscript.exe " & thisfile & " s ""%1""", "reg_sz"
addnewcmd "q", pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd"), pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd")
addnewcmd "qc", thisfile, pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd")
msgbox "安装成功!"
elseif pargs.count = 1 then
if ucase(pargs(0))="edit" then '只有一个参数且为edit时， 打开此脚本进行编辑。
pcmd.run("notepad.exe " & wscript.scriptfullname)
wscript.quit()
elseif ucase(pargs(0))="list" then '只有一个参数且为list时， 列出所有已经建立的快捷方式和其对应的目标文件。
resultfile=pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd") & "\listsyscmd.txt"
listsyscmd resultfile
pcmd.run("notepad.exe " & resultfile)
wscript.quit()
else '只有一个参数时， 默认处理方式是建立传入的文件路径的快捷方式。
pshortcutname=inputbox("请输入该快捷方式的名字：", "创建快捷命令...", "")
if pshortcutname="" then wscript.quit()
addnewcmd pshortcutname, pargs(0), pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd")
end if
elseif pargs.count = 2 then
if ucase(pargs(0))="s" then '查找快捷方式目标文件位置
'判断是否包括\，从右键菜单执行会直接传递目标地址，从快捷方式中需要组合快捷方式的地址。
if instr(pargs(1), "\") > 0 and instr(pargs(1), ".lnk") = 0 then '从右键菜单执行
pcmd.run("explorer.exe /select, " & pargs(1))
else '从命令行执行
if instr(pargs(1), "\") > 0 then '全路径.lnk路径
linkpath=pargs(1)
else
linkpath=pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd") & "\" & pargs(1) & ".lnk"
end if
linkpath=replace(linkpath, "\", "\\")
set pfiles = pwmiservice.execquery("select * from win32_shortcutfile where name = " & "'" & linkpath & "'")
for each pfile in pfiles
pcmd.run("explorer.exe /n, /select, " & pfile.target)
next
end if
else
'filelocation, shortcutname
pshortcutname=pargs(1)
addnewcmd pshortcutname, pargs(0), pcmd.regread("hkcu\software\microsoft\windows\currentversion\explorer\shell folders\syscmd")
end if
end if
复制好脚本存为syscmd.vbs或其它名称，就可以双击安装了，安装过程很简单，只有以下几步．
１.双击开始安装
２.选择安装目录
３.安装成功
现在再来查看一下右键菜单
1. 创建快捷命令功能
在你要创建快捷命令的exe程序或任何其它文件上点右键，然后选择快捷菜单中的＂ｇ创建系统命令＂，或者直接按字母ｇ，弹出以下对话框：
直接输入快捷命令，如ｑｑ，快捷命令ｑｑ就创建成功了．
然后想启动ｑｑ时直接win+r打开运行窗口，并输入ｑｑ回车，ｑｑ程序启动就这么简单
２.在这里打开ｃｍｄ功能
在任何文件或文件夹上点右键，然后选择＂ｑ在此打开ｃｍｄ＂或者直接按ｑ，就会以此目录为工作目录打开ｃｍｄ窗口
３.查找目标位置功能
对于windows快捷方式，经常遇到想要查找其它文件位置的情况，一般都是点右键然后查属性，查点查找文件找到，现在任何文件或文件夹上点右键都会有如下菜单，选择＂ｗ查找目标位置＂或直接按ｗ，可以查找到快捷方式的目标文件或文件夹位置，也可以查找到桌面上程序的目录位置．
直接定位文件所在目录并打开：
