redis不能访问本机真实ip地址的解决方案_Redis

redis不能访问本机真实ip地址的解决方案

2021-08-15 22:02麦角a Redis

这篇文章主要介绍了redis不能访问本机真实ip地址的解决方案，具有很好的参考价值，希望对大家有所帮助。如有错误或未考虑完全的地方，望不吝赐教

redis无法访问本机真实ip地址

1.我在进行用jedis来连接redis时出现了问题:

我用Jedis jedis = new Jedis("127.0.0.1",6379);可以成功连接,但是我如果把127.0.0.1换成的本机地址如192.168.1.103发现会报错.

2.解决这个问题

要修改redis.windows.conf的配置文件(说明一下我的redis是在windows版的)

这里要改两个地方:

1.修改bind的ip
2.修改protected-mode yes为protected-mode no

我的修改如下

				?

									# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

									bind 127.0.0.1 192.168.1.103

									# Protected mode is a layer of security protection, in order to avoid that

									# Redis instances left open on the internet are accessed and exploited.

									#

									# When protected mode is on and if:

									#

									# 1) The server is not binding explicitly to a set of addresses using the

									#    "bind" directive.

									# 2) No password is configured.

									#

									# The server only accepts connections from clients connecting from the

									# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain

									# sockets.

									#

									# By default protected mode is enabled. You should disable it only if

									# you are sure you want clients from other hosts to connect to Redis

									# even if no authentication is configured, nor a specific set of interfaces

									# are explicitly listed using the "bind" directive.

									protected-mode no